Broken Arm (Friction Arm)
The Broken Arm aka Friction arm is specially designed for lighting video film and photography. It's an adjustable arm that allows you to position a camera lighting fixture or accessory in any position within seconds! The two 5/8" (16mm) studs at either end are attached to ball joints rotate 360 degrees plus a cut-out in the sleeve surrounding the joint allows the stud to be bent at a 90 degree angle. One stud is tapped to receive a 3/8" - 16 thread while the other is tapped to receive 1/4 - 20 thread. Each stud has six milled flat surfaces so whatever you mount on the Arm will not rotate. Supports loads of up to 8.8 lbs (4 Kg)
